|
|
 |
 |
AMSOIL Synthetic 2-Cycle Oils |
Reduce friction and wear, improve throttle response and deliver maximum power. Clean-burning formulations prevent plug fouling and carbon deposits. Deliver quick, dependable starts. Reduce smoke and emissions and won't "load up" during prolonged idling. Provide outstanding cold temperature flow. Contain special anti-rust agents for off-season storage.
Product Codes: AIO, ATC
See Article: 2-Cycle Engine Applications and Lubrication Needs
Synthetic 2-Cycle Oils: Injector and 100:1
Recommended for Applications Requiring the Following Specifications :
- API TC
- NMMA TC-WII, TC-W3
- JASO FC
Maximum Protection For :
- Outboard motors
- Snowmobiles
- Motorcycles
- All air-cooled and water-cooled 2-cycle engines.
- Chainsaws
- ATVs
Product Description
AMSOIL Synthetic 2-Cycle Oils are superior quality lubricants which provide maximum protection and outstanding performance in all two-cycle gasoline engines.
Maximum Wear Protection
AMSOIL Synthetic 2-Cycle Oils are high film strength oils that virtually eliminate metal to metal contact so piston scuffing is prevented and wear is reduced. The high lubricity of AMSOIL Synthetic 2-Cycle Oils reduces friction so operating temperatures are controlled and maximum engine performance is achieved.
Reduced Engine Deposits
AMSOIL Synthetic 2-Cycle Oils contain top performing additives which have been tested and proven to minimize high temperature deposits. These oils resist oil breakdown from heat so they do not form gum, varnish, sludge or sticky deposits. Spark plug fouling and excessive carbon build-up in the combustion chamber, exhaust port and ring area are greatly reduced. In addition, the clean burn characteristics and lean mix ratios reduce smoke and exhaust emissions.
Prevents Rust and Corrosion
AMSOIL Synthetic 2-Cycle Oils contain special rust and corrosion inhibitors, providing excellent off-season storage protection.
Outstanding Low Temperature Performance
Both AMSOIL Synthetic Injector Oil and 100:1 Pre-mix Oil mix readily with fuel even in low temperatures. However, AMSOIL Injector Oil with its -45°F pour point and SAE #4 miscibility and fluidity rating, is better suited for severe cold. It is recommended for use in injector systems as well as 50:1 pre-mix. Also, AMSOIL injector oil will help ease starting because it does not solidify or get gummy in the motor which allows it to turn over more freely.
Application Recommendations - ATC 100:1 Pre-Mix
AMSOIL Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATC) is recommended for all water-cooled and air-cooled pre-mix applications. A mix ration of 100:1 is recommended for normal duty service in applications such as motorcycles, outboard motors, snowmobiles, weed eaters, lawn mowers and chain saws. For "severe service" applications, richer mix ratios of 50:1 to 80:1 are recommended. These include racing motors and hot operating workhorse motors that continuously run for extended periods of time.
AMSOIL Synthetic 100:1 Pre-Mix 2-Cycle Oil is recommended for all pre-mix applications specifying TC-W3, API TC and JASO FC. It is recommended for use with gasoline fuels only, and is not recommended for oil injection systems.
Application Recommendations - AIO Injector Oil
AMSOIL Synthetic 2-Cycle Injector Oil (AIO) is recommended for use in all summer and winter two-cycle injector applications and for pre-mix applications at 50:1 mix ratios. Use AMSOIL Synthetic 2-Cycle Injector Oil wherever TC-W3 or API TC oils are specified in water-cooled or air-cooled motors. AMSOIL Synthetic 2-Cycle Injector Oil is recommended for all two-cycle injector applications, including outboard motors, snowmobiles, motorcycles, ATVs and personal watercraft. AMSOIL Synthetic 2-Cycle Injector Oil is compatible with and recommended for two-cycle applications using catalytic converters.
AMSOIL Synthetic 2-Cycle Injector Oil is compatible with other synthetic and petroleum TC-W3 type oils and may be mixed with them. It is recommended for use with gasoline fuels only.
Mix Ratios
The mix ratio for AMSOIL 100:1 2-Cycle Oil is as follows :
- 1.3 oz. oil per 1 U.S. gallon gasoline
- 0.34 oz. oil per 1 liter gasoline
- 8 oz. oil per 6 U.S. gallon gasoline
For AMSOIL Injector Oil, mix at 50:1 mix ratio in either pre-mix or oil injection systems. |
|
Typical Technical Properties (Revised 1/02)
|
|
AMSOIL Injector and 100:1 Synthetic 2-Cycle Oils
|
| |
100:1 Oil (ATC)
|
Injector Oil (AIO) |
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
10.88
|
7.5 |
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
82.87
|
43.7 |
| Pour Point °C (°F) (ASTM D 97) |
-28 (-18)
|
-43 (-45) |
Flash Point °C (°F) (ASTM D 92)
|
264 (507)
|
92 (198) |
| Color |
Blue
|
Blue |
SAE Miscibility/Fluidity Grade
|
2
|
4 |
| Recommended for applications specifying API Service Classification: |
TC
|
TC |
| NNMA Rating |
TC-W3 (Pre-mix)
|
TC-W3 |
| JASO |
FC
|
N/A |
|
|
